水煙壺使用方法
How to use a hookah
第１步：
Step 1:
水煙壺中取出水煙桿，並在水煙壺住水。將水煙桿放回煙壺上。水煙桿應浸入水中約一英寸。
The hookah rod should be connected to the hookah, and the water should be held in the hookah. Put the hookah rod back on the smoker. The hookah rod is submerged about an inch into the water.
第2步：
Step 2:
將水煙膏輕輕地放入煙鍋中時將其翻鬆，使其鬆散到足以讓空氣通過。水煙煙膏應填充到鍋的邊緣，但不要太高.
The hookah cream should be turned over when it passes through the ground transmission path, so that the smoke can be dispersed until it passes through.
第3步：
Step 3:
如果您使用錫紙，請將錫紙包在鍋頭上，使其緊貼。確保在錫紙上戳孔，以便空氣可以通過。
If you are using tinfoil, wrap the foil around the head of the pan to allow the air to taut. Make sure to punch hole stickers in the tin foil so you can.
第4步：
Step 4:
將煙鍋放在水煙桿頂部
Drag the Smoke Pot to the Top of the Water Rod
第5步：
Step 5:
點燃您的水煙炭。如果你的是易燃炭，你可以用打火機點燃它們。棷子炭需要炭爐或火槍才能容易點燃。等待炭變紅，然後再把它放在您的煙鍋上，炭需均勻地分佈在錫紙上。注意不要加太多炭，因為您的水煙會變得很刺鼻。
Ignite your talent is your water charcoal. If you can light your fireworks easily, you can light them with a lighter. They need to be lit. 5 Steps to light the stove and wait for it to turn red, easily light a charcoal fire or light your charcoal. Pay attention to the pot, the charcoal needs to be evenly distributed on the tin foil. Don’t add too much as your hookah will be pungent.
第6步：
Step 6:
靜待兩至三分鐘，然後用軟管大力吸氣數啖（不用入肺），加快煮熱水煙膏。吸大概一兩分鐘可正常使用。
Quiet for three minutes, and then use two minutes to absorb heat and smoke hot water into the lungs.
